Modular L3 Ethernet Switch User's Guide
Figure 6- 208. Statistics log table window
Working With Services
The Services command has the following menu options:
♦ Device Tuning
♦ Event Log
♦ Refresh
♦ Polling Configuration
♦ Community Change
♦ Ping
♦ Refresh Device Version
Device Tuning
Device Tuning is used to determine the maximum amount of entries allowed in the various tables listed.
The changes are implemented only after reset.
To display the Device Tuning window:
♦ Select Services > Device Tuning. The Device Tuning window is displayed. There are
four tabs on the Device Tuning Window.
♦ General – Defines the maximum number of entries for the Bridge Forwarding table,
RMON Log table, and the Error Report table.
♦ IP – Defines the maximum number of entries for RIPs, ARP Forwarding table, FFT
table, DHCP connections, and the FFT upper and lower limits.
♦ IPX – Defines the maximum number of entries for RIP, SAP, and FFT upper and lower l
imits.
♦ IPM – Defines the maximum number of entries for FFT, PIM, and IGMP entries both
before and after the device is reset.
To display the Device Tuning window General tab:
229