D-Link DES-6300 User Manual page 225

Modular L3 Ethernet Switch User's Guide
Forwarding Router Address – IPX node address (12 hexadecimal digits) of the
next IPX router in the route to the destination network, described by this table
entry. If the destination network is one of the network segments directly connected
to this IPX router, this field is all zeroes.
Next-hop NetNum – Next-hop IPX network number.
Status – Defines whether the RIP interface is active. OFF is inactive but not
deleted.
To add an IPX Routing Table entry:
1. Display the IPX Routing Table.
2. Click . The IPX Routing Table Insert window opens:
Figure 6- 173. IPX Routing Table Insert window
An IPX circuit is linked to the Destination network.
To select an IPX circuit, on the IPX Routing Table Insert window click the Select Circuit
button. The Select Circuit window opens:
216