D-Link DES-6300 User Manual page 217

Modular L3 Ethernet Switch User's Guide
5. Close the RIP Circuit Filter Insert window. The RIP Circuit Filter Table opens.
6. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To edit a RIP Circuit filter:
1. Display the RIP Circuit Filter Table.
2. Select an entry in the table.
3. Click . The RIP Circuit Filter Edit window opens:
4. Complete the fields.
5. Click .
6. Close the RIP Circuit Filter Edit window. The RIP Circuit Filter Table opens.
7. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To delete a RIP Circuit filter:
1. Display the RIP Circuit Filter Table.
2. Select an entry in the table.
Figure 6- 165. RIP Circuit Filter Edit window
208