User Accounts Control Table - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
Figure 6-6. Add/Modify User Accounts screen
3. Type in your Username and press <Enter>.
4. If you are an old user, type in the Old Password and press <Enter>.
5. Type in the New Password you have chosen, and press <Enter>. Type in the same new password in the
following field to verify that you have not mistyped it.
6. Determine whether the new user should have Normal User or Administrator privileges.
7. Choose the APPLY command to let the password change take effect.
This method can also be used by an Administrator-level user to change another user's password.

User Accounts Control Table

Access to the console, whether using the console port or via Telnet, is controlled using a user name and
password. Up to three of these user names can be defined. The console interface will not let you delete the
current logged-in user, however, in order to prevent accidentally deleting all of the users with Administrator
privilege.
Only users with the Administrator privilege can delete users.
To view a user account:
Choose User Accounts Control Table from the User Accounts Management menu. The following
screen appears:
48 Using the Console Interface