Ip-Mac Binding Table - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

IP-MAC Binding Table

The window shown below can be used to create IP-MAC binding entries. Click the IP-MAC Binding Table on the IP-MAC
Binding folder to view the IP-MAC Binding Setting window. Enter the IP and MAC addresses of the authorized users in the
appropriate fields and click Add. To use IP-MAC binding checking on specific ports, the ports must first be enabled in the IP-
MAC Binding Ports menu (see above). The ports are specified in the Port field as a range of integers (for example "1-3") or
select the All option to apply to all ports.
Figure 6- 31. IP-MAC Binding Table menu
The Address Binding Trap Log Settings field will enable and disable the sending of trap log messages for IP-MAC binding.
When enabled, the Switch will send a trap log message to the SNMP agent and the Switch log when an ARP packet is received
that doesn't match the IP-MAC binding configuration set on the Switch.
To modify either the IP address or the MAC address of the binding entry, make the desired changes in the appropriate field and
Click Modify. To find an IP-MAC binding entry, enter the IP and MAC addresses and click Find. To delete an entry click Delete.
To clear all the entries from the table click Delete All.
54