DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
enabled port, the system will block the access by dropping its packet. The maximum number of IP-
MAC binding entries is dependant on chip capability (e.g. the ARP table size) and storage size of the
device. For DES-3350SR, the maximum number of IP-MAC Binding entries is 512. The creation of
authorized users can be manually configured by CLI or Web. The function is port-based, this means a
user can enable or disable the function on the individual port.
IP-MAC Binding Port
To enable or disable IP-MAC binding on specific ports, click IP-MAC Binding Port in the IP-MAC
Binding folder on the Configuration Menu to open the IP-MAC Binding Ports Setting window.
Select a port or a range of ports with the From and To fields. Enable or disable the port with the State
field. Click Apply to save changes.
Figure 6- 80. IP-MAC Binding Ports window
IP-MAC Binding Table
The window shown below can be used to create IP-MAC binding entries. Click the IP-MAC Binding
Table on the IP-MAC Binding folder on the Configuration menu to view the IP-MAC Binding
Setting window. Enter the IP and MAC addresses of the authorized users in the appropriate fields and
click Add. To modify either the IP address or the MAC address of the binding entry, make the desired
changes in the appropriate field and Click Modify. To find an IP-MAC binding entry, enter the IP and
MAC addresses and click Find. To delete an entry click Delete. To clear all the entries from the table
click Delete all.
112