Clock Source; Configuring The Clock Source - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide
Clock sour Clock sour ce ce
Clock sour

Clock source

Clock sour ce ce
The RM1d can operate at either 44.1kHz or 48kHz when set to it's own internal Word Clock, but
can also be configured to lock to incoming Word Clock appearing at either the AES 11 or BNC
digital inputs.
NOTE: The 4 (8) AES/EBU digital inputs and the (2) S/PDIF digital input incorporate Sample
Rate Converters (SRC) which allows external digital signals to be connected without
the need for the RM1d to be synchronised to the incoming Word Clock contained in
the digital source signal.

Configuring the Clock Source

1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the CLOCK
SOURCE menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the CLOCK SOURCE set-up mode.
The available options are:
Internal 48.0 kHz
Internal 44.1 kHz
External BNC
External AES11
The LCD display will show the current selection:
4 Use the PARAMETER (ENCODER) to select which word Clock source you want to use.
The SETUP button will flash.
5 Press the SETUP button to store the new clock settings.
6 Press the SETUP button to exit the Menu.
NOTE: If Word Clock is lost whilst connected to an external Word Clock source the following
display
59