System Menu; Setting System Preferences - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

System Menu

System Menu
System Menu System Menu System Menu
The System menu is used for setting global features such as Auto Edit, Talkback Swap, FX
Send, Pre-Post.
l
Auto Edit - On/Off
When Auto Edit mode is selected to be 'On', the LCD display will automatically show
parameter values whenever any encoder in the EDIT STRIP is adjusted.
l
Talkback Swap - On/Off
This setting allows the user to activate the Talkback Swap facility. (Please see
Appendix A 'RM1d Talkback Modes' for further information.
l
FX Send - Pre/Post Master
This setting allows the user to choose whether or not the selected send to the Lexicon
processor is routed via the AUX MASTER control or not.

Setting System Preferences

1 Press the SETUP button found below the LCD display
This will enter the SETUP mode
2 Now use the PARAMETER encoder to scroll to the System menu.
3 Press the flashing SETUP button to enter the menu.
The following LCD display will appear:
4 You may now use the UP/DOWN arrow buttons to select Auto Edit-On/Off, Talkback
Swap-On/Off, FX Send-Pre Master/Post Master.
5 Use the PARAMETER encoder to make your sselection.
6 Press the SETUP button to exit the Menu.
85