Table of Contents
Advertisement
88
4
Use the UP/DOWN arrow buttons to select the upper field of the LCD display, and
the PARAMETER encoder to select which pair of TDIF outputs you want to configure.
5
Now use the UP/DOWN arrow buttons to select the lower field of the LCD display and
the PARAMETER encoder to select where the output signal is derived from.
6
Press the SETUP button to exit the Menu.
NOTE: It is important that you read through the TDIF OUT ADV. USER section of this User
Guide before using the TDIF outputs.
Soundcraft TDIF Boxes
Mic/Line Interface
AES-EBU Interface
Analogue Interface
RM1d/RM1ds User Guide
Advertisement
Table of Contents
