Hpf Frequency; Selecting The Hpf Frequency - SoundCraft RM1ds User Manual

66
HPF Fr HPF Fr equency equency
HPF Fr

HPF Frequency

HPF Fr equency equency
The HPF Frequency menu allows the frequency for the High Pass Filter located in the EDIT STRIP
to be selected.
The frequencies available are 80, 100, 150, 200 and 250 Hz.

Selecting the HPF Frequency

1 Press the SETUP button found below the LCD display
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the list of menu pages to locate the
HPF FREQUENCY menu.
3 The following LCD display will appear:
4 The frequency field will be flashing.
5 Press the EDIT button on the channel you want to adjust. The channel number
should appear in the upper line of the LCD display.
6 Once you have made your selection use the PARAMETER encoder to select the HPF
frequency you wish to use.
7 Press the SETUP button again to exit the menu.
RM1d/RM1ds User Guide