Table of Contents
Advertisement
78
Master Faders
Master Faders
Master Faders
Master Faders
Master Faders
The Master faders for the STE 1 (PROG) and STE 2 (AUD) Outputs can be switched off if
necessary, the output will then be set at unity gain.
Configuring the STE 1 and STE 2 Master Faders
1
Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2
Use the PARAMETER encoder to scroll through the menu pages to locate the MASTER
FADERS menu page.
The SETUP button will flash upon selection.
3
Press the SETUP button to enter the MASTER FADERS set-up mode.
The LCD display will show the current selection:
4
Use the PARAMETER encoder to select the Master Faders to be either ENABLED or
DISABLED.
5
Press the SETUP button to exit the Menu.
RM1d/RM1ds User Guide
Advertisement
Table of Contents
