Table of Contents
Advertisement
Transferring the Software
Once the download cable is connected between the PC and the RM1d and the PC configured
as described, the following procedure needs to be completed to enable the new software to be
downloaded.
Make sure that the RM1d is switched off.
Hold down the 'U' key on your PC keyboard whilst switching the DPS-2 power supply on.
The following message should appear in the window of Hyperterminal:
"Waiting for application code Upload"
Once the above message appears you can release the 'U' key.
Select, Transfer | SendFile and click Browse... to locate and select the .abs file from wherever
you put it (eg, c:\RM1d Software). Select the 'Xmodem' protocol in the lower box.
Click "send".
While the program is being transferred Hyper terminal should show a progress box.
The transfer will take about 3 minutes 20 seconds. During the transfer the RM1D desk will be
blank. This is OK. So long as the "Packet" number is changing on the PC the new software is
being transferred OK.
129
RM1d/RM1ds User Guide
Advertisement
Table of Contents
