Table of Contents
Advertisement
RM1d/RM1ds User Guide
Add Some Equalisation to the Signal
When an EDIT button is pressed on a channel the EDIT STRIP becomes active on that selected
channel and offers facilities such as panning, equalisation, 2 auxiliary sends and a trim control.
To use EQ do the following:
1.
Press the EDIT button on channel 1
2.
The EDIT STRIP is now active for channel 1
3.
Press the EQ IN button to switch the EQ 'On'.
4.
Use the 3 band EQ to make adjustments.
5.
You can see the frequencies you are currently adjusting on the LCD display by pressing
the EDIT button beneath the LCD display screen.
Add Some Reverb to the signal
Adding an internal reverb effect to a signal is just like working with an external effect processor,
but the signal remains in the digital domain at all times without the need for cables. As you
would expect we will need to send a signal into the effects processor and blend the return
signal into the mix.
1.
Select the AUX 1 Source button on the LEXICON
unit to receive its input from Aux 1.
2.
Ensure the FX IN button is illuminated to activate the effects unit.
3.
Press the FX EDIT button to enter the FX menu.
4.
Press the flashing PRESETS button.
5.
Now use the PARAMETER encoder to select 'Large Hall' from the factory presets.
6.
Press the DOWN arrow button to select the lower line of the LCD display and the use the
PARAMETER encoder to select FX Preset Recall.
7.
Press the flashing PRESETS button to recall the effect.
8.
Next, ensure that the EDIT STRIP is selected for Channel 1 by pressing the EDIT button
on that channel.
9.
Select the AUX 1 button next to the AUX MASTER control and turn the control fully
clockwise.
Bring up the fader for Channel 1 along with the STE 1 (PROG) MASTER fader so that you
10.
can hear your microphone.
11.
Now gradually adjust the AUX 1 control to the right of the HF control on the EDIT STRIP
until you can hear the effect being mixed in with the microphone signal. You will notice
that the AUX 1 legend will illuminate in the channel's status window.
TM
Section, this tells the in-built effects
29
Advertisement
Table of Contents
