Table of Contents
Advertisement
RM1d/RM1ds User Guide
Input Assignment
The first step is to decide which input - in this case Mic Input 1 - we want to use and assign it
to either INPUT 1 or INPUT 2 of one of the channels found on the RM1d. In this example we are
going to use INPUT 1 of channel 1:
1.
Press the SETUP button and use the PARAMETER encoder to scroll alphabetically to the
ASSIGN CHANNEL menu.
2.
Press the SETUP button again to enter ASSIGN CHANNEL mode.
3.
Press the EDIT button on channel 1, and then make sure that INPUT 1 is selected (the
INPUT 2 button should not be illuminated). You will notice that the display on the LCD
screen will show your selection.
4.
Now use the PARAMETER encoder to scroll through the list of named sources, until you
find 'Mic/Line 1'. As you scroll through the different input choices, notice how the input
names also change in the display found at the top of channel 1
5.
You have now assigned Mic/Line 1 to INPUT 1 of channel 1.
Press the SETUP button again to exit SETUP mode.
Input Naming
Although not essential, you may choose to give the input a custom name for ease of recognition.
This is limited to four (4) characters.
1.
Press the SETUP button and use the PARAMETER encoder to scroll alphabetically to the
INPUT NAMING menu.
2.
Press the SETUP button again, the left hand field of the display will flash. Select MIC/
LINE 1 using the PARAMETER encoder.
3.
Use the RIGHT and LEFT ARROW buttons to then position the cursor over any of the 4
character spaces in the right hand field of the LCD. 'Character-by-character', use the
PARAMETER encoder to scroll through the whole alphanumeric character list, or press
the UP ARROW button to increment through the NUMBERS or the DOWN ARROW button
to delete the current character or insert a space.
4.
Press the SETUP button again to exit SETUP mode.
27
Advertisement
Table of Contents
