Lockout Pin; Selecting The Lockout Pin - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

Lockout PIN

Lockout PIN
Lockout PIN Lockout PIN Lockout PIN
The Lockout PIN menu allows a personal identification number (PIN) to be chosen for accessing
the Lockout capabilities of the RM1d.
Any number with a maximum of 4 digits may be used.

Selecting the Lockout PIN

1 Press the SETUP button found below the LCD display
This will enter the SETUP mode
2 Now use the PARAMETER encoder to scroll to the Lockout PIN menu.
3 Press the flashing SETUP button to enter the menu.
The following LCD display will appear:
4 You may now use the PARAMETER encoder or the UP arrow button to select a digit
from 0 to 9. Use the LEFT and RIGHT arrow buttons to move the cursor until you
have entered your 4 chosen digits.
5 Now press the flashing SETUP button again and you will be prompted to confirm you
chosen PIN. Do this by re-entering your chosen number and then pressing the SETUP
button.
6 The display should then read 'New PIN set for lockout' confirming that your new PIN
can be used for setting up the lockout facility.
7 Press the SETUP button again to exit the menu.
NOTE: You can reset the PIN to blank (----) at any time by pressing the DOWN arrow button.
71