Analogue Inputs; Selecting And Adjusting An Analogue Input - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

Analogue Inputs

Analogue Inputs
Analogue Inputs Analogue Inputs Analogue Inputs
The analogue inputs page allows fast access to all of the analogue inputs available on the
RM1d.
The Gain settings for each input can be adjusted here and where applicable 48V phantom
power can be switched On or Off. Options are as follows:
Selected stereo analogue inputs also have a choice of the following preferences:
All settings made here can be stored as part of a snapshot Preset for instant recall.

Selecting and adjusting an Analogue input

1 Press the SETUP button found below the LCD display
This will enter the SETUP mode.
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
Analogue Inputs menu. The LCD display will show:
3 Press the SETUP button to enter the Analogue Inputs mode. The LCD display will
read:
4 Use the UP/DOWN arrow buttons to select the top line of the LCD display, and then
using the PARAMETER encoder you may scroll through the available analogue input
options.
53