Auto Muting; Configuring A Channel For Mute Activation - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

Auto Muting

Auto Muting
Auto Muting Auto Muting Auto Muting
The RM1d channel faders can be configured so that when a designated fader is opened a
number of different MUTE activations can be performed.
The available options are as follows:

Configuring a Channel for Mute activation

1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the AUTO
MUTING menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the AUTO MUTING set-up mode.
The LCD display will show:
The LCD display will show the selected channel.
4 Press the EDIT button on the channel you want to configure.
5 Now use the PARAMETER encoder to select the type of Mute activation you require.
(See table above).
6 Press the SETUP button to exit the Menu page.
57