Assigning The Dynamics Processors - SoundCraft RM1ds User Manual

Digital radio console

Table of Contents

Assigning the Dynamics Processors

Press the DYN button found below the LCD display

This will enter the Dynamics mode

Now press the EDIT button on the channel you want to assign a Dynamics processor

to. (The LCD display will show the selected channel number)

Use the DOWN and UP arrow buttons to select the 'Type' page.

Now use the PARAMETER encoder to choose the type of Dynamics processor you

require.

The UP/DOWN arrow buttons can now be used to select the 'DYN In/Out' page, and

the PARAMETER encoder can be used to switch the Dynamics processor In or Out.

TIP:

The LEFT arrow button can be used to toggle the Dynamics processor In and Out.

NOTE: Whenever the DYN button is selected, the INPUT DISPLAY will change from showing

the name of the input source to showing Gain Reduction and Gate Open/Close activity

on any channel that has a Dynamics processor switched 'On'.

RM1d/RM1ds User Guide

Table of Contents

Rm1d