Table of Contents
Advertisement
114
5
Press the UP arrow button to enter the top field of the LCD display.
6
Press the PRESETS button to exit the Menu.
NOTE: There is NO UNDO facility when deleting Presets!
Recalling Factory Default Preset
Recalling the Factory Default Preset will reset the control surface to it's default settings. This is
useful as a starting point when you are setting up a new layout for the Control Surface.
1
Press the PRESETS button to enter the PRESETS menu.
2
Turn the PARAMETER encoder left (anticlockwise) to select the 'Factory Default'
preset for recalling.
3
Press the DOWN arrow to highlight the 'Recall Preset' field of the LCD display.
4
Press the PRESETS button to recall the Factory Default preset.
RM1d/RM1ds User Guide
Advertisement
Table of Contents
