Table of Contents
Advertisement
RM1d/RM1ds User Guide
Adjusting Dynamics Processor Settings
1.
Once you have assigned a Dynamics processor to a channel, you may use the UP/
DOWN arrow buttons to step through the relevant parameters and adjust them
accordingly.
2.
Available parameters are as follows:
Storing and Naming a Dynamics Preset
Once you have programmed the Dynamics processor to your requirement, you may store it for
later recall by doing the following:
1.
Make sure the DYN button is selected.
2.
Press the flashing PRESETS button
The LCD display will show the following:
3.
Use the PARAMETER encoder to locate the Preset memory location you would like to
save to.
4.
Now use the DOWN arrow button to select the 'Dyn Preset Store' line in the display.
The PRESETS button will begin to flash.
99
Advertisement
Table of Contents
