Brother HL-Series Technical Reference Manual page 253

Revision C 16/01/96
Select double-height / double-width mode
Esc[@n1n2n3n4n5n6
<1Bh><5Bh><40h>n1n2n3n4n5n6
Ÿ
This command enables you to select single or double line spacing and single or double
character height and width.
Ÿ
n should be set to 4 and n
1
Ÿ
To set double line spacing and select double-height characters set n
Ÿ
To set double line spacing and select normal height characters set to n
Ÿ
To set single line spacing and select double-height characters set to n
Ÿ
To set single line spacing and select normal height characters set n
Ÿ
To select double-width characters set n
Ÿ
To select single-width characters set n
LPRINT CHR$(27); CHR$(91); CHR$(64); CHR$(4); CHR$(0); CHR$(0);
CHR$(0); CHR$(34); CHR$(1); 'Set double line spacing and print
double-height, double-width characters.
Select character from the All character Code table
Esc\n1n2<Character data>
<1Bh><5Ch>n1n2<Character data>
Ÿ
This command enables you to print characters from the All Character Code table.
Ÿ
n and n
1
Ÿ
The number of characters printed is 256*n
Ÿ
Control codes included in the character data are not executed.
LPRINT CHR$(27); CHR$(92); CHR$(64); CHR$(1); CHR$(65); CHR$(66);
CHR$(67); CHR$(68); CHR$(69); 'Print 320 characters starting
ABCDE...
Select a character from the All Character Code table
Esc^<char-code>
Ÿ
This command enables you to print a single character from the All Character Code table.
Ÿ
A control code is not executed if the code is sent immediately following this instruction.
LPRINT CHR$(27); CHR$(94); CHR$(36); 'Printed a dollar sign
(27)(91)(64)n1n2n3n4n5n6
,n and n
2 3
specify the number of characters to be printed.
2
(27)(94)<Char-code>
Chapter 6 " IBM Proprinter XL " - 17
to 0.
4
to 2.
6
to 1.
6
(27)(92)n1n2<Character data>
+n
2 1.
<1Bh><5Eh><Char-code>
to 34.
5
to 33.
5
to 18.
5
to 17.
5