Revision C 16/01/96
Set right margin
EscQn
This command sets the right margin in columns from the left edge of the page. The width of a
column is the current character width.
In proportional spacing mode a column width of 1/10" is adopted.
This command clears all tab settings.
The minimum space allowed between the left and right margins is 1/5".
LPRINT CHR$(27); CHR$(81); CHR$(72); 'Right margin 6" at 12 cpi
Set perforation skip
EscNn
This command sets the bottom margin and enables perforation skip, that is, whenever the print
position reaches the bottom margin the printer performs a page eject and moves the print
position to the top of the next page.
n = the number of lines at the current line spacing setting between the bottom margin and the
bottom edge of the paper.
n must be in the range 1 to 127.
Esc C (Set Page Length) and Esc O (Cancel Perforation Skip) cancel automatic perforation
skip.
If the bottom margin specified by this command would be located above the top margin, the
command is ignored.
LPRINT CHR$(27); CHR$(78); CHR$(4); 'Set bottom margin to 4 lines.
Cancel perforation skip
EscO
This command cancels the automatic perforation skip feature.
LPRINT CHR$(27); CHR$(79); 'Cancel perforation skip.
(27)(81)n
<1Bh><51h>n
(27)(78)n
<1Bh><4Eh>n
(27)(79)
<1Bh><4Fh>
Chapter 5 " EPSON FX-850 " - 14