Revision C 16/01/96
Select expansion of printable code area
Esc6
This command enables you to print characters whose character codes are in the range 128 to
159.
You can define your own characters and assign codes in this range to them.
LPRINT CHR$(27); CHR$(54); 'Expand printable area
Cancel expansion of printable code area
Esc7
This command prevents you from printing characters with codes in the range 128 to 159.
LPRINT CHR$(27); CHR$(55); 'Cancel codes 128–159
Expand printable code area
EscIn
This command permits you to enable or disable the printing of characters whose character
codes are in the ranges 0 to 31 and 128 to 159. You can define your own characters and
assign codes in these ranges to them.
Set n to 1 to enable printing of characters in the ranges 0 to 31 and 128 to 159.
Set n to 0 to disable printing of characters in the ranges 0 to 31 and 128 to 159.
When you specify the value for n you can use the character codes for '0' and '1' (48 and 49)
instead of 0 and 1 if you wish.
LPRINT CHR$(27); CHR$(73); CHR$(1); 'Expand printable area
(27)(54)
<1Bh><36h>
(27)(55)
<1Bh><37h>
(27)(73)n
<1Bh><49h>n
Chapter 5 " EPSON FX-850 " - 27