Brother HL-Series Technical Reference Manual page 334

Revision C 16/01/96
IN - Initialize Set Instruction
IN[;]
• Returns the graphics mode to initial conditions;
Function
Plot mode
Relative character direction
Line type
Line pattern length
Window
Relative character size
Symbol mode
Tick length
Standard character set
Alternate character set
Character set
Character slant
Scaling
Label terminator
Chord angle
Fill type
Fill distance
Fill slant
Pen thickness
Pen condition
Rotation
Scaling points
Equivalent Condition
Instruction
PA; Absolute
DR 1,0; Horizontal
LT; Solid line
LT; 4% of distance from P1 to P2
IW; Set at limits of printable
area according to paper size
SR; Width=0.75% of |P2x-P1X|
Height=1.5% of |P2y-P1y |
SM; Off
TL; X-axis: 0.5% of |P2y-P1y |
Y-axis: 0.5% of |P2x-P1x|
CS 0; Character set 0
CA 0; Character set 0
SS; Standard character set
selected
SL 0; 0 degrees
SC ; Off
DT chr$(3) chr$(3)
----- 5 degrees
FT; Bi-directional fill, type 1
FT; 1% of distance from P1 to P2
FT; 0 degrees
PT; Set at 0.3 mm
PU; Pen up
RO; Set at 0 degrees
IP; Initialized according to
paper size
Chapter 9 "HP-GL" 7