Brother HL-Series Technical Reference Manual page 151

Revision C 16/01/96
2)PCL-Specific Variables
The following values are PCL (HP LaserJet 4 emulation) specific and can be set and requested using
PJL. These variables must be set using LPARM : PCL option.
Variables
FONTSOURCE
FONTNUMBER
PITCH
PTSIZE
SYMSET
3) PostScript-Specific Variable
The currently defined PostScript specific variable is listed as follows. This variable can be set using the
LPARM : POSTSCRIPT option.
Variable
PRTPSERRS
Description
The valid values for
FONTSOURCE are
I (Internal Fonts)
C (Cartridge Fonts)
C1 (Card Fonts)
S (Permanent Soft Fonts)
If the specified value becomes
invalid, it is automatically
changed to the default value.
Font number. This value can be
seen on the Print Font Test selected
from the Control Panel. This value
is automatically changed to the
lowest value whenever the
FONTSOURCE setting is changed.
Pitch of the default font in units of
characters per inch. The pitch
value can be specified to two
decimal points
Height of the default font in units
of points. The point size is
significant to a quarter of a point
Symbol set
Description
The printing of a PostScript error
page is enabled or disabled by this
variable
Chapter 3 "PJL" - 28
Sample Value Range
I, C, C1, S,
0, 1, 2, ..n
0.44, 0.45, 99.99
4.00, 4.25, .......999.75
ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852,
PC8TK, WINL1, WINL2, WINL5,
DESKTOP, PSTEXT, VNINTL,
VNUS, MSPUBL, MATH8,
PSMATH, VNMATH, PIFONT,
LEGAL, ISO2, ISO4, ISO6,
ISO10, ISO11, ISO 14, ISO15,
ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69,
ISO84, ISO85, WIN30, HPGERM,
HPSPAN, MCTEXT
Sample Value Range
OFF, ON