Revision C 16/01/96
Set vertical tab stops
EscBn1n2n3...NUL
<1Bh><42h>n1n2n3...<00h>
This command enables you to set up to sixteen vertical tab stops based on the current line
space setting.
The tab stops must be set in ascending order. If you specify the tab settings in any other order,
any settings made with a previous Esc B command are cleared.
The value of n
Vertical tab settings are not affected by subsequent changes in the line spacing setting.
To set up a group of equally spaced tab stops use the Esc e 1 command.
Esc B 0 clears the vertical tab settings set with a previous Esc B command.
You can move the print position to the tab stops using the VT control code.
LPRINT CHR$(27); CHR$(66); CHR$(12); CHR$(24); CHR$(0);
'Set tab stops at lines 12 and 24.
(27)(66)n1n2n3...(00)
must be in the range 0 to 255.
i
Chapter 5 " EPSON FX-850 " - 18