Initialize Command - Brother HL-Series Technical Reference Manual

Hide thumbs Also See for HL-Series:
Table of Contents

Advertisement

Revision C 16/01/96

6.4. Initialize command

The INITIALIZE command resets the PJL Current Environment and User Default Environment
variables to the Factory Default values. I/O configuration values and the unsolicited status settings are
not affected by this command.
It is recommended to restrict the use of the INITIALIZE command when the printer is shared by several
users such as in a networking environment in order to use a standard environment and avoid having
default features changed by different print jobs.
Syntax :
@PJL INITIALIZE [<CR>]<LF>
Parameters :
• The INITIALIZE command has no parameters.
• The INITIALIZE command resets the following environment variables to the Factory Default
values.
• If any additional personality (emulation) is added to the printer, the printer may support more
personality-specific variables than the variables listed above. In any case, the INITIALIZE
command resets the PJL Current and User Default environment values for all personalities to their
factory default.
Example :
<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT setting to <CR><LF>
@PJL COMMENT factory defaults <CR><LF>
@PJL INITIALIZE <CR><LF>
<ESC>%-12345X
Chapter 3 "PJL" - 30

Advertisement

Table of Contents
loading

Table of Contents