Ustatus Category - Brother HL-Series Technical Reference Manual

Revision C 16/01/96
LPARM:PCL FONTSOURCE=I [4 EMULATED]<CR><LF>
LPARM:PCL FONTNUMBER=0 [2 RANGE]<CR><LF>
LPARM:PCL PITCH=10.00 [2 RANGE]<CR><LF>
LPARM:PCL PTSIZE=12.00 [2 RANGE]<CR><LF>
LPARM:PCL SYMSET=ROMAN8 [43 ENUMERATED]<CR><LF>
LPARM:POSTSCRIPT PRTPSERRS=OFF [2 ENUMERATED]<CR><LF>
<FF>

USTATUS Category

The application can send the @PJL INFO USTATUS command to check the possible unsolicited
status types of the printer, and the current setting value and possible values for them.
Syntax :
@PJL INFO USTATUS [<CR>]<LF>
Response Syntax :
@PJL INFO USTATUS <CR><LF>
variable = value [ value feature information ] <CR><FF>
[<HT> returned option <CR><LF>]
...
...
...
...
variable = value [ value feature information ] <CR><FF>
[<HT> returned option <CR><LF>]
<FF>
B5<CR><LF>
I<CR><LF>
C<CR><LF>
C1<CR><LF>
S<CR><LF>
0<CR><LF>
70<CR><LF>
0.44<CR><LF>
99.99<CR><LF>
4.00<CR><LF>
999.75<CR><LF>
ROMAN8<CR><LF>
ISOL1<CR><LF>
ISOL2<CR><LF>
....
....
WIN30<CR><LF>
HPGERM<CR><LF>
HPSPAN<CR><LF>
MCTEXT<CR><LF>
OFF<CR><LF>
ON<CR><LF>
Chapter 3 "PJL" - 45