Brother HL-Series Technical Reference Manual page 150

Revision C 16/01/96
Variables
DUPLEX
BINDING
FIRSTPRINT
DENSITY
LANG
CPLOCK
PASSWORD
ECONOMODE
ECONOLEVEL
MPTRAY
AUTOSLEEP
TIMEOUTSLEEP
MEDIATYPE
HUMIDITY
Description
Duplex mode
Returns the setting of binding edge
for duplex printing.
First print mode. This makes the
first print speed faster by moving the
polygon motor at Power On. Setting
to MIDDLE is effective only the first
page after the Power ON. Setting to
HIGH makes scanner moving
everytime.
Returns the printing density level
from 1 to 15. The default value is 8.
Returns the language for control
panel, status readback information.
Returns the lock status control panel.
If OFF, the control panel is
unlocked. If ON, the control panel is
locked.
Password for lock to write on
NVRAM by DEFAULT/INITIALIZE
command.
Toner Saving Mode
Level for Toner saving mode. If set
to 1, approx. 50 % toner is saved. If
set to 2, approx. 25% toner is saved.
MP Tray Priority For AUTO feeder
selection mode.
Power Save Mode
Timeout for Power Save mode. The
printer goes into the power save
mode after time-out.
Media Type. The temperature of
fixing unit is adjusted depending on
this setting.
Depending on this setting, the fixing
voltage of the printer is adjusted.
Chapter 3 "PJL" - 27
Sample Value Range
ON, OFF
LONGEDGE, SHORTEDGE
NORMAL, MIDDLE, HIGH
1 (lighter) to 15 (darker)
ENGLISH, FRENCH, GERMAN,
DUTCH, SPANISH, ITALIAN,
FINNISH, NORWEGIAN,
PORTUGUESE, DANISH
OFF, ON
0 to65535
OFF, ON
1, 2
CASSETTE, FIRST
ON, OFF
1 to 99
REGULAR, THICK,
TRANSPARENCY
LOW, HIGH