Revision C 16/01/96
Restore default tab settings
EscR
This command restores the default horizontal tab settings which are at every eight columns,
starting at the ninth column. There are no default vertical tab settings.
LPRINT CHR$(27);
4.3 Using characters
Select character set I
Esc7
This command selects IBM Character set I for use in subsequent printing operations.
LPRINT CHR$(27); CHR$(55); 'Select character set I
Select character set II
Esc6
This command selects IBM character set II for use in subsequent printing operations.
LPRINT CHR$(27); CHR$(54); 'Select character set II
Set pitch to 10 cpi
DC2
This command sets the printing pitch to 10 characters per inch (cpi).
If condensed character mode has previously been set, it is cancelled.
LPRINT CHR$(18); 'set pitch to 10 CPI
Set pitch to 12 cpi
Esc:
This command sets the printing pitch to 12 characters per inch (cpi).
LPRINT CHR$(27); CHR$(58); 'set pitch to 12 CPI
(27)(82)
<1Bh><52h>
CHR$(82); 'Restore default tab stops.
(27)(55)
<1Bh><37h>
(27)(56)
<1Bh><36h>
(18)
<12h>
(27)(58)
<1Bh><3Ah>
Chapter 6 " IBM Proprinter XL " - 13