kozy heat MINNETONKA 55345-MV Installation Manual page 44

SMART THERMOSTAT (Transmitter Operation)
The Smart Thermostat function adjusts flame height based on set temperature and actual room temperature. As room temperature gets closer
to set point the Smart Function will automatically adjust flame down.
1. Press Thermostat key until the word SMART appears on right side of temperature bulb graphic.
2. To adjust set temperature, press Up/Down arrow keys until desired set temperature is displayed on LCD screen.
Figure 8a
FAN SPEED CONTROL
Fan speed can be adjusted through six (6) speeds. To activate this function use Mode Key to index to fan control icon. Use Up/Down Arrow
Keys to turn on, off or adjust fan speed. A single 'beep' will confirm reception of the command.
Figure 8b
ACCENT LIGHT KIT (not available in all fireplace models)
The auxiliary function controls the AUX power outlet on the Fan control module which in turn controls the light kit.
1. Use MODE key to guide you to AUX icon.
2. Press Up Arrow Key to turn light kit on, press Down Arrow Key to turn light kit off. A single 'beep' will confirm reception of the
command.
3. Use the installed dimmer switch to adjust brightness of lights.
Figure 8c
SYSTEM OPERATION
8