kozy heat MINNETONKA 55345-MV Installation Manual page 43

TEMPERATURE DISPLAY
With the system in OFF position, press Thermostat Key and Mode Key at the
same time to change from degrees F to C. Look at transmitter LCD screen to
verify that C or F is visible on right side of Room Temperature display.
REMOTE FLAME CONTROL
The remote control has six (6) flame levels. With system ON and flame level at maximum, press Down Arrow Key once to reduce flame
height by one step until flame is turned off. The Up Arrow Key will increase flame height on step each time it is pressed. If Up Arrow Key
is pressed while system is on but flame is off, the flame will come on in High position. A single 'beep' will confirm reception of the
command.
Figure 7b
ROOM THERMOSTAT (Transmitter Operation)
The remote control can operate as a room thermostat. The thermostat can be set to desired temperature to control a rooms comfort level.
To activate this function, press the Thermostat Key. The LCD display will change to show the room thermostat is ON and set temperature is
now displayed. To adjust set temperature, press Up or Down arrow keys until desired set temperature is display on LCD screen.
Figure 7c
SYSTEM OPERATION
7
Figure 7a