Setting The Display Language - Canon iR3530 Manual

• Date and Time
- The date and time of the transmission are recorded.
• Fax Number
- Your machine's fax number is recorded.
• Sender's Name (TTI (Transmit Terminal Identification))
- For fax documents, the name registered as the sender's name is recorded.
• Destination Name
- If you send an original using Coded Speed Dialing or by selecting a destination from the Address
Book, the stored destination's name appears on the sending record. (See "Dialing Functions," on p.
5-15.)
• Page Number
- The current page number out of the total number of pages of the original is recorded.
NOTE
• You can set the machine so that the sending record is not printed. (See "Printing the TX Terminal ID," on
p. 5-9.)
• If the machine is set so that the sending record is printed at the top of the recording paper, and not all of
the items are registered, only the required registered items and the total number of original pages are
printed. However, when using Direct Sending, the total number of original pages are not printed.
• If you do not want to print the destination name on the recipient's paper, set Display Destination Name
to 'Off' in TX Terminal ID in User Settings in Custom Fax Settings (from the Additional Functions
screen). (See "Printing the TX Terminal ID," on p. 5-9.)

Setting the Display Language

If you decide to switch the display language, set the Language Switch setting to 'On' before
inputting characters.
If the Language Switch setting is set to 'Off', and then you set it to 'On' after inputting characters,
the characters may not be displayed correctly. If this happens, either re-enter the characters
after setting the Language Switch setting to 'On', or enter characters with the Language Switch
setting set to 'Off'.
Things You Must Do Before Using This Machine
1
1-11