Canon iR3530 Manual page 117

4
Press [Registered Size 1] or [Registered Size 2]
size in millimetres using [-] and [+].
Press [X] (horizontal axis)
Press [Y] (vertical axis)
Press [OK].
X
Y
The platen glass
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
The selected size is set, and the display returns to the Other Size screen.
The registered document size is displayed on top of the key in which it is registered.
NOTE
• If you register a new document size into a key that has already been registered with a document
size, the new document size overwrites the registered document size.
• If you scan a registered document size, the scanned image is not rotated automatically.
5
Press [Done]
enter a value.
enter a value.
Scanning
Area
[Cancel].
enter the document
3-27
Document Size
3