Specifying Report Settings; Tx Report - Canon iR3530 Manual

Specifying Report Settings

You can specify how various reports are printed.
Report Settings is a mode in Additional Functions. For instruction on setting the modes in
Additional Functions, see "What are Additional Functions?," on p. 5-2.
NOTE
The receive job log can be printed only if A3, A4, or A4R (plain, recycled, or colour paper only) is loaded
in the paper sources whose settings in Fax in Drawer Eligibility For APS/ADS in Common Settings (from
the Additional Functions screen) are set to 'On'. (See Chapter 4, "Customizing Settings," in the
Reference Guide.)

TX Report

The TX Report enables you to check whether the documents were sent correctly to the
intended destination. A TX Report can automatically be printed after the documents are sent.
You can also set the machine to print a TX Report only when a transmission error occurs. You
can adjust the TX Report setting to print the first part of the document as part of the report to
remind you of the document's contents.
NOTE
• For more information on TX Report, see "TX Report/Error TX Report," on p. 9-2.
• The default settings are:
- TX Report: For Error Only
- Error Copy Print: On
1
Press
Report].
[Report Settings] [Fax] under <Custom Settings>

Specifying Report Settings

7
[TX
7-3