Batch Sending Memory Box - Canon iR3530 Manual

Batch Sending Memory Box

The Batch Sending Memory Box enables you to send documents that have been read into it, to
a specific destination at a specific time each day. (See "Batch Sending Memory Box," on p.
3-17.)
By setting the send time to a time when the communication charges are low, you can reduce
communication costs.
You can specify the following items for the Batch Sending Memory Box.
Item
Memory Box
Name
Password
5
Destination
TX Start Time
An asterisk (*) indicates the default setting.
NOTE
You should store the send destination in a One-Touch Speed Dialing key.
1
5-56
Setting Memory Boxes
Sets the memory box name.
Sets a password to control the memory box. It is
necessary to enter the password in order to change
the contents of the memory box, or to scan an
original into the memory box.
Sets the destination of the documents in the
memory box.
Sets the start time for transmission. The documents
in the memory box are automatically sent at the
specified start time.
Press [Custom Fax Settings]
Inboxes Settings].
Description
[File Settings]
Setting
Batch Sending*
You can enter up to 24
alphanumeric characters.
Not required
A one to seven digit number
Required
You can specify using the
Address Book and
One-Touch Speed Dialing.
Required
No default setting*
[Memory