List Of Error Codes Without Messages - Canon iR3530 Manual

List of Error Codes without Messages

If an error occurs while a document is being sent or received, an error code is displayed on the
job log on the System Monitor screen, as well as being included in the various reports. Check
what the error code is and take the required steps to solve the problem. (See Chapter 4,
"Checking/Changing the Fax Status," and "Report and List Samples," on p. 9-2.)
# 001
Cause Paper or originals are jammed.
Remedy Remove any jammed paper or originals.
# 003
Cause Communications that take longer than the preset time (64 minutes) caused the error.
Remedy 1 Reduce the resolution, and try sending the document again. (See "Resolution, Density, and
Image Quality," on p. 2-2.)
Remedy 2 When receiving a document, ask the remote party to either reduce the resolution at which the
document is scanned, or divide the document into two or more parts before sending it.
# 005
Cause 1 The other party did not answer within 35 seconds.
Remedy Confirm that the remote machine is able to communicate, and try again.
Cause 2 The receiving machine is not a G3 fax.
Remedy Check the type of receiving machine with the receiving party.
8-11
Error Messages
8