Table of Contents
Advertisement
•
Destination Name
- If you send an original and select a destination from the Address Book, the stored
destination's name appears on the sending record. (See "Storing New Addresses," on
p. 9-5.)
•
Page Number
- The current page number out of the total number of pages of the original is recorded.
NOTE
•
You can set the machine so that the sending record is not printed. However, for users in
the United States, this information must be printed at the top of every fax or I-fax that you
send. Therefore, the TX Terminal ID setting must always be turned 'On'. (See "Printing
the TX Terminal ID," on p. 8-28.)
•
If the machine is set so that the sending record is printed at the top of the recording
paper, and not all of the items are registered, only the required registered items and the
total number of original pages are printed.
Setting the Display Language
If you decide to switch the display language, set the Language Switch setting to
'On' before inputting characters.
If the Language Switch setting is set to 'Off', and then you set it to 'On' after
inputting characters, the characters may not be displayed correctly. If this happens,
either reenter the characters after setting the Language Switch setting to 'On', or
enter characters with the Language Switch setting set to 'Off'.
Setting the Current Date and Time
You can set the current date and time. The current date and time settings are used
as standard timer settings for functions that require them.
•
GMT:
•
Time Zone:
•
Daylight Saving Time:
The time at the Greenwich Observatory in England is
called GMT (Greenwich Mean Time).
The standard time zones of the world are expressed
globally in terms of the difference in hours (± up to 12
hours) from GMT (± 0 hours). A time zone is a region
throughout which this time difference is the same.
In some countries, time is advanced throughout the
summer season. The period in which this is applied is
called "Daylight Saving Time."
Things You Must Do Before Using This Machine
1
1-11
Advertisement
Table of Contents
