Two-Sided Originals
You can set the machine to automatically turn over two-sided originals placed in the feeder, so
as to scan each side separately.
IMPORTANT
• The Two-sided Original mode is available only if the optional Feeder (DADF-N1) is attached.
• The Two-sided Original mode cannot be used with the Document Size Select (Other Size or Long
3
Original) or Direct Sending modes.
• When you are scanning originals with a horizontal (landscape) orientation, such as A4R, make sure to
place them horizontally in the feeder. If these originals are placed vertically, the back sides of these
originals are scanned upside down.
1
3-22
Two-Sided Originals
On the Special Features screen, press [2 1-sided].
The selected mode is set.
IMPORTANT
Place the originals in the feeder.