Reducing A Received Document - Canon iR3530 Manual

Hide thumbs Also See for iR3530:
Table of Contents

Advertisement

Reducing a Received Document

You can set the machine to automatically reduce received documents so that the whole
document is printed within the printable area of the paper.
NOTE
The default settings are:
- Receive Reduction: On
- RX Reduction: Auto
- Reduce %: 90%
- Reduce Direction: Vertical Only
1
2
5
5-40
Printing Received Documents
Press
[Custom Fax Settings]
Reduction].
Select [On] or [Off].
IMPORTANT
If you select [Off], the received document is not automatically reduced to fit the size of the paper.
If the size of the received document exceeds the printable area, the image is divided into equal
sections and printed onto separate sheets of paper. However, if the received document exceeds
the recording paper slightly (12 mm or less), the part of the image that does not fit on the paper
is not printed.
If you select [On]:
Specify each settings
[Printer Settings]
press [OK].
[Receive

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2230

Table of Contents