Canon iR3530 Manual page 239

Q Is the telephone line type set correctly?
A Check the type of telephone line that has been set. (See "Selecting the Type of Telephone
Line," on p. 1-12.)
Q If you are sending with a Subaddress setting, did you enter the correct subaddress and
password for the destination that you are sending to?
A Check the Subaddress and Password settings.
Memory is full.
Q Are unwanted documents stored in memory?
A Check the TX Document and RX Document memory, and erase unwanted documents or
error documents from memory. (See "Printing or Erasing Documents," on p. 3-10, and
Chapter 2, "Introduction to the Mail Box Functions," in the Copying and Mail Box Guide.)
The document does not print clearly on the remote machine.
Q Is the platen glass clean?
A Use your machine to make a copy of the document, and check it for streaks. If streaks
appear, clean the platen glass. (See Chapter 7, "Routine Maintenance," in the Reference
Guide.)
The density of the documents sent to a remote machine is too light.
Q Is the Exposure setting set to 'Light' and the Original Type setting set to 'Photo'?
A Change the Exposure setting to 'Dark' and the Original Type setting to 'Text', and send the
document again. (See "Resolution, Density, and Image Quality," on p. 2-2.)
When Problems Occur
8
8-3