Lubricating The Ps100; Inspecting The Ps100 - Pressure Seal PS 100 Manual

Lubricating the PS100

Lubricate the drive chain and sprockets with chainlube.

Inspecting the PS100

1. Check the feed roll, paper separator and fold rollers for cracks, tears or
excessive wear. Replace if necessary.
2. Check the top cover switch for proper operation.
3. Check all electrical connections; check for worn or frayed electrical cables.
When completed, replace all removed components and power up the PS100. Verify
that the machine operates properly.
If applicable, report higher-than-normal usage rates to your supervisor.
Page 45