Chapter Four - Assemblies And Adjustments - Pressure Seal PS 100 Manual

Chapter 4
Assemblies and Adjustments
This chapter describes how to remove, replace and where applicable adjust the major
mechanical and electrical components of the PS100 Folder/Sealer. By following these
procedures, you can quickly and correctly service a customer's PS100.
Refer to figures 4 and 5 on page 9, and the illustrated parts list in chapter 6 of this manual
to help you understand the text-only procedures in this chapter.
Note: Only authorised service people are allowed to work on and repair this device.
Unauthorised repair work can result in extensive damage to the machine, serious injury to
people, and invalidation of the warranty
.
Page 26