Site Requirements
Space requirements
2.5m x 2.75m is required. This area allows approximately 1m of clear space around
the machine.
Power requirements
• Input voltage:
• Input frequency: 50 Hz UK/Europe (60Hz USA)
• Input current:
• Mains lead:
Places to avoid
• Avoid placing the PS100 under a blowing air duct or beside an open window.
Strong air currents can disrupt document feeding, resulting in mishandled
documents.
• Avoid electrical outlets controlled by wall switches or timers.
• Avoid locations subject to direct sunlight, excessive heat, moisture or dust.
• Store Pressure Seal documents away from UV light sources. UV light degrades
adhesives, shortening document shelf life.
240 volts UK (210/220V Europe) (110V USA)
2.7 amperes
2m three-pin 5A (male plug with BSI363A connector)
2m Schuko lead (Europe)
2m NEMA 5 power cord (USA)
Page 11