Removing The Infeed Panel; Removing The Outfeed Panel - Pressure Seal PS 100 Manual

Removing the infeed panel

1. Press the PS100's power switch to the off position and then unplug the power
cord from the wall outlet.
2. Remove the top cover.
3. Remove the four snake eye screws that hold the infeed panel in place (two at
the top and two beneath the machine), and then remove the infeed panel.
To replace the infeed panel, complete the steps of this procedure in reverse order.

Removing the outfeed panel

1. Press the PS100's power switch to the off position and then unplug the power
cord from the wall outlet.
2. Remove the top cover.
3. Remove the four snake eye screws that hold the outfeed panel in place (two at
the top corners and two underneath the unit), and then remove the outfeed
panel.
To replace the outfeed panel and outfeed tray, complete the steps of this procedure
in reverse order.
Page 28