Before You Begin; Cleaning The Ps100 - Pressure Seal PS 100 Manual

Before you begin

1. Ask the operator about:
• How the machine is performing
• Problems encountered during operation
• Frequency of use and the number of documents processed per month
2. Note any increase in machine usage rate and use this information as a guide for
checking the machine
3. Check all operator adjustments and the document being processed

Cleaning the PS100

1. Press the PS100's power switch to the off position and disconnect the mains
lead from the power source.
2. Wipe the external covers using a soft cloth dampened with a mild household
detergent.
3. Remove the top cover, both side covers, infeed and outfeed panels, folding
plates, top folding roller and guide roller.
4. Vacuum all visible paper dust and debris. Remove any scraps of paper lodged in
the folding plates.
5. Clean paper dust from the infeed and outfeed sensors.
6. Remove the in-feed roll. Clean the feed roll and paper separator with a lint-free
cloth dampened with cleaning fluid.
7. Clean the top-folding roller with cleaning fluid.
8. Wipe the surface of the rubber fold rollers using the cloth dampened with
cleaning fluid.
9. Wipe the surface of all four sealing rollers with cleaning fluid.
Page 44