System Configuration Via An Isdn For Multipoint Conference - Sony PCS-1 Operating Instructions Manual

System Configuration via an ISDN for Multipoint Conference

You need to connect the optional PCSA-B384S or PCSA-B768S ISDN Unit
especially designed for use with this System and to install the optional PCS-
320M1 H.320 MCU software.
This allows you:
• To hold a multipoint videoconference among up to six sites over ISDN.
• To show still images stored in a "Memory Stick".
• To show the still images on the second TV monitor or projector.
• To pick up a large number of participants' voices using up to two external
microphones.
System configuration
1 PCS-P1/P1P Communication Terminal
2 PCS-C1/C1P Camera Unit
3 PCS-R1 Remote Commander
4 TV monitor (not supplied)
5 PCS-320M1 H.320 MCU software (not supplied)
6 PCSA-B384S or PCSA-B768S ISDN Unit (not supplied)
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
The illustration shows an example
using the PCSA-B768S ISDN
Unit.
System Configuration
21