Sony PCS-1 Operating Instructions Manual page 208

3
Enter "Registered User Name" and "Password" on page 2 of the SIP Setup
menu.
SIP Setup
Page: 2/7
Note
On the Communication Terminal with the PCS-323M1 H.323 MCU software installed,
enter the user names and passwords for all the terminals to be connected for a multipoint
videoconference. Up to 5 terminals can be registered.
4
Enter the address and port number for the SIP server on page 4 of the SIP
Setup menu.
SIP Setup
Page: 4/7
Note
Up to four SIP servers can be set up. To set up multiple SIP servers, enter the addresses
and port numbers for all the SIP servers on page 4 to page 7.
To display the user name or address for SIP in the launcher menu
Specify the item you want to display in "Number Display" in the General
Setup menu (page 50).
To use audio only when connected by SIP
• Set "Video Mode" in the Dial Setup menu (page 44) and "Video Mode" in
the Answer Setup menu (page 47) to "SIP No Video".
• When you conduct a multipoint videoconference, set "Video Mode" in the
Multipoint Setup menu (page 62) to "SIP No Video".
208
Preparing for a Videoconference Using SIP
Registered User Name SIP1
ISDN
Password ****
Save
Primary
Proxy Server Address xxx.com
Proxy Port
Registrar Server Address xxx.com
Registrar Port
Save
Cancel
Cancel