Sony PCS-1 Operating Instructions Manual page 269

Signal Port number
(First point)
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
FECC RTP 49156
FECC RTCP 49157
Data conference 49158
RTP
Data conference 49159
RTCP
When the H.323 MCU software is
installed (Custom: TCP Port
Number 3000 and UDP Port Number
3000)
When "Port Number Used" is set to
"Custom" in the LAN Setup menu, the PCS-
1/1P uses the port numbers defined by the
values entered in "TCP Port Number" and
"UDP Port Number".
For example, when "TCP Port Number" is
set to "3000" and "UDP Port Number" is set
to "3100", the PCS-1/1P operated as the
main terminal uses the following port
numbers.
Signal Port
number
(First point)
RAS (PCS-1/ Any number from 3000 to
1P) 3010 (using Gate
Keeper)
RAS 1718 or 1719 (using Gate
(GateKeeper) Keeper)
Q.931 (dial) Any number from 3000 to
3010
Q.931 (answer) 1720
H.245 Any number from 3000 to
3010
Audio RTP 3100
Port number Signal
th
(N point)
49153+20 ×
(N-1) Audio RTCP
49154+20 ×
(N-1) Video RTP
49155+20 ×
(N-1) Video RTCP
49156+20 ×
(N-1) FECC RTP
49157+20 ×
(N-1) FECC RTCP
49158+20 ×
(N-1) Data conference
RTP
49159+20 ×
(N-1) Data conference
RTCP
Port number
th
(N point)
3100+20 ×
(N-1)
Port Port number
th
number (N point)
(First point)
3101 3101+20 ×
(N-1)
3102 3102+20 ×
(N-1)
3103 3103+20 ×
(N-1)
3104 3104+20 ×
(N-1)
3105 3105+20 ×
(N-1)
3106 3106+20 ×
(N-1)
3107 3107+20 ×
(N-1)
269
Specifications