Connection Example Using The Data Solution Box - Sony PCS-1 Operating Instructions Manual

Connection Example Using the Data
Solution Box
Notes
• Be sure not to turn on the power of each unit until all the connections are completed.
• Do not connect/disconnect the camera cable or the interface cable with the power on.
Doing so may damage the Camera Unit, Communication Terminal or Data Solution
Box.
• Used with the Data Solution Box for the first time, the Communication Terminal may
automatically upgrade the software of the Data Solution Box. While the upgrading
message is displayed on the monitor screen, be sure not to turn off the Communication
Terminal. Doing so may cause malfunction of the system.
Front
to RGB IN A
D-sub 15-pin
cable
(not supplied)
Computer
Computer
PCS-P1/P1P Communication
Interface cable (supplied with
PCSA-DSB1S Data Solution Box
Rear
to RGB
to LINE
IN B
OUT
D-sub 15-
pin cable
(not
supplied)
Active speakers

Connection Example Using the Data Solution Box

PCS-C1/C1P Camera Unit
Terminal
ON LINE
the PCSA-DSB1S)
LINE OUT OUT AUX IN MIC 1 MIC 2 MIC 3 MIC 4 MIC 5
AUX
to MIC 1
– MIC 5
PCS-A1 (not supplied) or
PCSA-A3 microphone (not
supplied)
POWER LAN ALERT
to DSB
to TERMINAL
TO PROCESSOR RGB OUT
to RGB OUT
D-sub 15-pin
cable (not
supplied)
Projector, etc.
147